Warning: imagejpeg(/home/reliefline/public_html/wp-content/uploads/2019/08/Tarpaulin-75x50.jpg): failed to open stream: Permission denied in /home/reliefline/public_html/wp-includes/class-wp-image-editor.php on line 402

Warning: imagejpeg(/home/reliefline/public_html/wp-content/uploads/2019/08/Tarpaulin-80x80.jpg): failed to open stream: Permission denied in /home/reliefline/public_html/wp-includes/class-wp-image-editor.php on line 402

Plactic Sheeting As per UNICEF/UNHCR Standard

Plactic Sheeting As per UNICEF/UNHCR Standard

  • UNHCR/UNICEF standards
  • Fire retardant (optional)*, waterproof, rotproof and UV-resistant
  • Reinforced plastic tarpaulin in 4m x 5m sheet or 4m x 50m roll developed by international research project and designed for long outdoor use in all climates
  • Made of woven high density black polyethylene (HDPE) fibers, warp x weft, laminated on both sides with low density polyethylene (LDPE) coating
  • Highly recommended for family shelter protection.

Technical specifications

Dimensions

Size / sheet 4.00 x 5.00 m ±1%
Size / roll 4.00 x 50.00 m ±1%

Materials

  • All our materials are UV-proof, waterproof, rotproof and fire retardant*
  • Marking and logo customised to your requirements.

                                              Materials

Sheet / roll 150 gsm ±20 g/m² woven Polyethylene (HDPE) inner black fibers, warp x weft, laminated on both sides with LDPE coating
Denier Min 1000
Tensile strength Min 600N both directions warp and weft (BS 2576, 50mm grab test or equivalent)
Tear strength Min 100N both directions (BS 4303 wing tear or equivalent) or under ISO 4674 (A2)
UV resistance Max 5% loss of original tensile strength under ISO 1421 after 1500 hours UV under ASTM G53/94 (UVB 313nm peak)
Welding Only 1 is allowed, lengthwise. Min resistance 80% of original tarpaulin tensile strength in the weft under ISO 1421 plus additional procedure
Eyelets Aluminum reinforcement eyelets or equivalent on 4 sheet sides of single sheets at 100cm (±5 cm) Centre to Centre, providing very strong fixation
points

Packing & shipping

4 x 5 m sheet

Roll of 4 x 50 m sheet (in roll form)Roll of 4 x 50 m sheet (in bale form)

  • Pass CPAI section 5 and 6 with maximum 10s after flame average and maximum 30s after flame per test piece
  • Ageing under ISO 4892-2, type A, 360 hours.
Content per bale 5pcs
Weight per bale 20 kg
Dimension per bale 56 x 39 x 20 cm
Volume per bale 0.0437 cbm
Bale per pallet 20 bales (100 pcs)
Weight per pallet 414 kg
Dimension per pallet 112 x 78 x 114 cm
Volume per pallet 0.9959 cbm
Content 1 roll
Weight per roll 36.50 kg
Dimension per roll 220 x 20 x 20 cm
Volume per roll 0.088 cbm
Roll per cage 50 rolls
Weight per cage 1,746 kg
Dimension per cage 224 x 110 x 215 cm
Volume per cage 5.298 cbm
Content 1 roll per bale
Weight per roll 36.50 kg
Dimension per roll 56 x 78 x 17 cm
Volume per roll 0.0743 cbm
Roll per pallet 12 rolls
Weight per pallet 452 kg
Dimension per pallet 112 x 78 x 115 cm
Volume per pallet 1.0047 cbm

Estimated loadability

Container

With pallet

Without pallet

20’ GP container 28 pallets (2,800 pcs) 3,300 pcs
40’ GP container 60 pallets (6,000 pcs) 6,500 pcs (due to weight restriction)
40’ HC container 60 pallets (6,000 pcs) 6,500 pcs (due to weight restriction)

Estimated loadability

Container

With cages

Without cages

20’ GP container 5 cages (250 rolls) 380 rolls
40’ GP container 10 cages (500 rolls) 710 rolls (due to weight restriction)
40’ HC container 10 cages (500 rolls) 710 rolls (due to weight restriction)

Estimated loadability

Container

With pallet

Without pallet

20’ GP container 28 pallets (336 rolls) 380 rolls
40’ GP container 60 pallets (720 rolls) 696 rolls (due to weight restriction)
40’ HC container 60 pallets (740 rolls) 710 rolls (due to weight restriction)

Leave a Reply

Your email address will not be published. Required fields are marked *